We have developed our Cold Rooms production to meet marcket requirements thanks to the cooperations and help of our costomers over the past fourty years. This new line of Commercial Cold Rooms is the result of our continued development and we can offer the best price and quality expected in today marcket.

PRODUCT
This new line of Commercial Cold Rooms is the results of our continued development and we can offer the best price and quality expected in today market. The manufacture of mid sized Cold Rooms is based on a 3O cm module. Insulated panels are made of galvanised and lacquered steel; PU direct injection, CFC free; interlocking hooks included.



Two insulation sizes are available - 70 mm and 100 mm - and four different heights - 2100, 2400 2700 and 3000 mm - with or without floor. Rounded interior corners with built-in aluminium profiles make the inside of the Cold Room hygienic and easy to clean.
TOP
Standard finishing Stainless steel finishing
Urethane properties
Coefficient of thermic conductivity: 0,0228 W/m2 °K
Coefficient of heat transfer K factor for thickness
mm 70 : 0,32 W/m2 °K
Coefficient of heat transfer K factor for thickness
mm 100 : 0,22 W/m2 °K
Density; 40 - 42 Kg/m3
Compression strength KPa 170
(1,70 Kg/cm3)
Application-fied 333 - 233°C
(+60-40°C)
Resisting to the fire DIN 4102 - ISO
TOP

Standard, sliding and glass doors are available and can be fitted on any of the four sides. Curtain strips can also be supplied. Aluminium or plastic racks, hanging hooks, slide guides and other optional extras are available on request.

Assembly

Assembly of the Cold Room is very simple and can be carried out by anyone. The door is an integral part of a panel 1200 mm long. Thanks to the rounded aluminium profiles silicone or similar material to close joints are not required.

TOP

Back