Series "CF" cooling station has been realized for cold production particulariy
employed in a supermarkets or for one or more cold rooms. "CF" cooling station
produces the cold required from varous users (cold rooms, ice banks etc.) this
cold is obtained from progressive, partial on total insertion of cooling station
compressors. In case of one or more cold rooms at positive (0°C) that negative
(25°C) the solution of cooling stations gives the following advantages:
- Less consumption of electric power due to less start up of plant
- Always sensible pressures in the system with good values
- In case of break of one compressor the cold production is guaranted all the same
for the various users.
- A lot of time saving installation expenses and guarantee to customer of functional
plant always
- Rotating of compressors for homogeneous wear of cooling station
- Never total standstill of cooling station is required for maintenance or breaks
of one more compressors. The cooling station can works with only one compressor
producing cold untill the repair is finished.
TECHNICAL DESCRIPTION
- Base in stainless steel painted
- Regular shock-absorbers
- Semi-hermetic compressor
- Cooling fans on compressor head (series BT)
- Security oil taps
- Oil separator
- Oil reserve
- Oil level regulator every compressor
- Compensation valve in LT
- Oil filter
- Oil protection resistance
- Oil commutator
- Compression commutator with flange
- Antivibrating in compression for every compressor
- Reserve valve for every compressor
- Interception ball taps for every compressor
- Inlet commutator with one or more out
- Inlet antivibrating for every compressor
- Inlet dehydrating fliter for every compressor
- Interception ball taps for every compressor
- Liquid separators
- Liquid commutator with tap
- Liquid receiver with tap
- Dehydrating filter with solid cartridge
- Liquid and humidity indicator
- Tap for filter by-pass
- High and low pressure pressostat
- Low pressostat for functioning of step compressores
- Differential oil pressostat for compressor with oil pump
- High pressure manometer
- Low pressure manometer
- Oil manometer for compressor with oil pump
- Security taps
- High pressure pressostat and for partiality condenser fans (on request)
TOP
| SERIES TN |
SERIES BT |
| Model |
A
mm |
B
mm |
C
mm |
Weight
Kg |
Model |
A
mm |
B
mm |
C
mm |
Weight
Kg |
| CF. 7/2 |
1500 |
1200 |
1500 |
514 |
CF. 5/2 |
1500 |
1200 |
1500 |
530 |
| CF. 10/2 |
1500 |
1200 |
1500 |
623 |
CF. 7/2 |
1500 |
1200 |
1500 |
608 |
| CF. 7/3 |
2000 |
1200 |
1500 |
700 |
CF. 5/3 |
2000 |
1200 |
1500 |
720 |
| CF. 10/3 |
2000 |
1200 |
1500 |
825 |
CF. 7/3 |
2000 |
1200 |
1500 |
790 |
| CF. 15/3 |
200 |
1200 |
1500 |
840 |
CF. 10/3 |
200 |
1200 |
1500 |
810 |
| CF. 7/4 |
2800 |
1200 |
1500 |
990 |
CF. 4/5 |
2000 |
1200 |
1500 |
860 |
| CF. 10/4 |
2800 |
1200 |
1500 |
1050 |
CF. 7/4 |
2800 |
1200 |
1500 |
1030 |
| CF. 15/4 |
2800 |
1200 |
1500 |
1070 |
CF. 10/4 |
2800 |
1200 |
1500 |
1030 |
TOP
REGULATION SYSTEM OF AC&R OIL LEVEL
The regulation system of AG&R oil level saves energy and increases the
service life of the compressors.
WORKING SYSTEM
The oil level in the compressor casing must be controlled. The oil regulating
system permits this kind of control and in the meantime keeps the oil level in
every casing regalar. The regulating system avoids the need of complex equilization
circuits. It works with compressors which are different in model and size.
- oil separator
- oil supply
- oil level regulators
On every compressor is installed an oil regulator to control the inner oil level.
The common oil supply feeds every regulator and the oil separator feed the oil supply.
TOP
